Compliance is not only about certification, but long-term consistency in production.
Some boards pass initial testing but drift in emission levels over time.
Edges swell in humid processing environments.
Density variation causes machining mismatch between batches.
We control CARB P2 MDF Board from fiber selection to final pressing.
Fibers are processed under low-emission resin systems at 170-200℃ and 4.5-7MPa pressure. Density is stabilized at 720-780kg/m³ through homogenization. Each batch is tested for formaldehyde emission, internal bond strength, and dimensional tolerance.
Used for export furniture, cabinet systems, office interiors, and regulated North American projects. Reduce compliance risk and improve approval efficiency.
CARB P2 low emission system
720-780kg/m³ density control
170-200℃ hot pressing stability
4.5-7MPa forming pressure
| 2440×1220mm | |
| 6-25mm | |
| 720-780kg/m³ | |
| 4%-7% | |
| 170-200℃ | |
| 4.5-7MPa | |
| E0 / E1 low-emission resin | |
| CARB P2 / TSCA Title VI | |
| ±0.2mm | |
| >=0.6 MPa | |
| Pallet + Moisture Film + Edge Protectors | |
| 22CBM | |
| 50,000 Sheets | |
| CARB P2 / FSC / CE |
Q: What does CARB P2 mean?
A: A California Air Resources Board emission standard.
A: Yes, widely used in North American furniture projects.
Q: Is emission stable long-term?
A: Controlled through raw material and production monitoring.
A: Yes, for interior furniture systems.
A: Emission, density, strength, and dimensional checks.
Tag ti wâ: carb p2 mdf board, China carb p2 mdf board manufacturers, suppliers, factory
